UM380 03 010
7
Hardware Installation Procedure
The packaging is externally labelled with the order code and contents. Check this against
the order form and packing slip to make sure that the correct system type has been received.
Return the unit if there is any discrepancy.
Save the packaging material and store it in a clean, dry area for re-use if the equipment is to
be moved.
2.2.2 Hardware Installation
Note:
There is no physical difference between the InterChange iQ 2000 unit and the iQ
2000plus unit.
InterChange iQ 2000
Figure 3: Front View of an Interchange iQ 2000 unit.
Figure 4: Rear View of an InterChange iQ 2000 unit.
Back Panel Equipment
•
Impedance Switch - Refer to Section 3.1.3
•
BNC Connectors - Refer to Section 2.6
•
RJ45 Connectors - Refer to Section 2.6
•
Alarm Port - Refer to Appendix B.9
•
Clock Synchronisation Switch - Refer to Section 3.1.2
•
Ethernet Port - Refer to 2.6.3
•
Management Port - Refer to section 4
•
Power Supply Unit - Refer to section 1.3.2
