Wenglor SEFG Muting, Operating Instructions Manual

Page: 166 / 187

Diagnosis 166
13.3.2 Codes for General Errors
Code Affected
components Status Description/cause Measures
002 Emitter /
receiver Temporary, restarts
after 2 s Parameter configuration
request from normal op-
eration and error mode
003 Emitter /
receiver Temporary, restarts
after 2 s Parameter configuration
request from normal op-
eration and error mode
Application errors
E 010 Emitter /
receiver Temporary, restarts after
12 s Supply voltage too low Make supply voltage
available within the
specified limits
E 011 Emitter /
receiver Temporary, restarts after
12 s Supply voltage too low Make supply voltage
available within the
specified limits
E 012 Emitter /
receiver Permanent Supply voltage too high Make supply voltage
available within the
specified limits
E 013 Emitter /
receiver Permanent Supply voltage too high Make supply voltage
available within the
specified limits
E 020 Receiver Permanent OSSD A: Short to posi-
tive/ capacity too high Resolve short to positive
E 021 Receiver Permanent OSSD A: Short to posi-
tive/ capacity too high Resolve short to positive
E 022 Receiver Permanent OSSD A: Short to
ground/overload Resolve short to ground
E 023 Receiver Permanent OSSD A: Short to
ground/overload Resolve short to ground
E 024 Receiver Permanent OSSD B: Short to posi-
tive/ capacity too high Resolve short to positive
E 025 Receiver Permanent OSSD B: Short to posi-
tive/ capacity too high Resolve short to positive
E 026 Receiver Permanent OSSD B: Short to
ground/overload Resolve short to ground
E 027 Receiver Permanent OSSD B: Short to
ground/overload Resolve short to ground
E 028 Receiver Permanent Slave inputs: Different
switching status Check slave connection,
inconsistent signals
E 029 Receiver Permanent Slave inputs: Different
switching status Check slave connection,
inconsistent signals