Wenglor SEFG Muting, Operating Instructions Manual

Page: 165 / 187

Safety Light Curtain 165
13.2.2 Error Indicator on the Receiver
Display Error
According to the diagnosis code in the segment display (see Section 13.3, page 165)
1
OSSD 1 (red)
OSSD2
(green)
OSSD
LED lit
LED off
2 RES
RES
LED off
3 SIG LOW
SIG LOW
LED off
4 ERROR
ERROR
LED lit
Action According to the relevant diagnosis code ( Section 13.3, page 165)
13.3 Diagnosis Codes
A precise analysis of the current status of the ESPE is possible via the code on the 4-digit segment display on
the receiver.
The following overviews describe the codes and measures for removing errors.
13.3.1 Codes for Information and Warnings
Code Status Description/cause Measures
WED Only initially
Contactor monitoring
signal present, but EDM
function is not active.
Parametrize contactor
monitoring
Always
Synchronous run (paral-
lel to other displays)
Not required
Always
Status display
of the inputs
Not required
Always Status display muting Not required