![background image](http://html.mh-extra.com/html/wen/tt1015/tt1015_instruction-manual_956583032.webp)
TROUBLESHOOTING GUIDE
WARNING!
Stop using the tool immediately if any of the following problems occur. Repairs and replacements
should only be performed by an authorized technician. For any questions, please contact our customer service
at
1-(800) 232-1195
, M-F 8-5 CST or email us at
PROBLEM
CAUSE
SOLUTION
Machine will not
start.
1. Not plugged in.
1. Check connection.
2. Wrong size of extension
cord.
2. Consult extension cord chart on p. 10.
3. Worn carbon brushes.
3. Replace carbon brushes.
4. Faulty power cord, motor, or
switch.
4. Consult WEN customer service at
1(800) 232-
1195.
Blade does not
come up to speed.
1. Blade arbor nut not
tightened.
1. Tighten blade arbor nut.
Does not make
accurate 45° or
90° cuts.
1. Bevel stops not adjusted
correctly.
1. Check blade with combination square and
adjust stops.
2. Angle pointer not set
accurately.
2. Check blade with combination square and
adjust pointer.
3. Fence is not properly
aligned.
3. Adjust fence.
Saw makes
unsatisfactory cuts.
1. Dull Blade.
1. Sharpen or replace blade.
2. Blade mounted backwards.
2. Turn blade around.
3. Gum or pitch on blade.
3. Remove blade and clean.
4. Incorrect blade for cut.
4. Change blade to correct type.
Material binds
blade when
ripping.
1. Fence not aligned with blade. 1. Check and adjust fence.
2. Warped wood.
2. Select another piece of wood.
3. Excessive feed rate.
3. Reduce feed rate.
4. Riving knife or blade guard
not aligned with blade.
4. Align riving knife or blade guard with blade.
32
Summary of Contents for TT1015
Page 38: ...38 NOTES ...
Page 39: ...39 NOTES ...