31
MAINTENANCE
STORAGE
1. Store the tool in a clean and dry place away from the reach of chil-
dren. Store in temperatures between 41° to 86°F.
2. Cover the table saw in order to protect it from dust and moisture.
It is preferable to store it in its original packaging with the instruction
manual.
Accessory Storage
You can store your saw’s accessories on the saw for maximum con-
venience.
The power cord can be wrapped around the cord clip at the back of the
saw (Fig. 45).
Fig. 45
The miter gauge and fence are stored on the left
side of the saw, as shown on page 14.
NOTE:
A space is also provided for the anti-
kickback pawls, in case you ever need to remove
them from the blade guard assembly.
Miter Gauge Storage
Anti-Kickback Pawls Storage
The blade wrench, riving knife, blade guard as-
sembly, and push stick are stored on the right
side of the saw, as shown below.
NOTE:
When storing the blade guard assembly,
loosen the knob shown in figure 46. Place the
slot in the blade guard spreader over the tab on
the mounting bracket, then tighten the knob to
secure the assembly.
Riving Knife
Storage
Blade Wrench
Storage
Push Stick
Storage
Blade Guard
Assembly Knob
Fig. 46
Summary of Contents for TT1015
Page 38: ...38 NOTES ...
Page 39: ...39 NOTES ...