![background image](http://html.mh-extra.com/html/wen/tt1015/tt1015_instruction-manual_956583024.webp)
OPERATION
NON-THROUGH CUTTING (CONT.)
7. Slowly push the workpiece through the blade with the push stick (included), push blocks (not included), and/or
feather board (not included) until the workpiece is pushed completely past the blade.
8. Turn off the table saw, allow the blade to come to a complete stop, and carefully slide the workpiece out.
9. Immediate reinstall the blade guard assembly on the saw.
DADO CUTTING
A dado cut is similar to a non-through cut, in which multiple cuts are
performed in succession to create a slot in the workpiece, called a
dado. Refer to and follow the instructions in "Non-Through Cutting" on
this and the previous page.
Specialized dado blades are also available as aftermarket accessories,
as are specialized throat plates compatible with such dado blades.
WEN offers a dado blade set (
model BL088D
) and dado throat plate
(
model TT1015-DADO
), available for purchase at
wenproducts.com.
CAUTION!
Use extreme caution when dado cutting. Always check dado blade clearance before connecting
the saw to a power source.
CAUTION!
Do not stack dado blades thicker than the maximum capacity of 13/16". Do not use dado blades
larger than 8" in diameter.
CAUTION!
Follow all instructions included in your dado blade's owner's manual. Failure to do so could
result in serious injury to yourself or others.
Fig. 31
WARNING!
Do not use a dado blade set without a special dado throat plate installed! The throat plate
included with your saw is NOT compatible with dado blades.
SAFETY CUTTING ACCESSORIES
Safety cutting accessories for this table saw include the following: push stick (included), push blocks (not in-
cluded), and/or feather board (not included).
DUST COLLECTION
This table saw is equipped with a 2 ½” dust collection port. Connect a dust collector to the port at the rear of the
saw (See " DUST COLLECTION" section on page 16).
24
Summary of Contents for TT1015
Page 38: ...38 NOTES ...
Page 39: ...39 NOTES ...