![background image](http://html.mh-extra.com/html/wen/tt1015/tt1015_instruction-manual_956583019.webp)
19
1. Remove the blade guard assembly. See page 11.
2. Raise the blade all the way up, and remove the table
insert.
3. Push the arbor lock (Fig. 24) in and rotate the blade until
it locks in place. This will prevent the blade from turning.
4. While holding the arbor lock (Fig. 25 - 1), use the in-
cluded arbor wrench or a 23mm combination wrench to
loosen and remove the arbor nut (Fig. 25 - 2). Remove the
blade flange and the blade.
5. Install the new blade on the arbor, with the directional
arrows (Fig. 26 - 1) on the blade matching the arrow on the
inside of the blade housing (that is, so the teeth point down
at the front of the saw). Install the flange and arbor nut.
Securely tighten the nut. (Fig. 26).
OPERATION
Fig. 24
WARNING!
The blade is very sharp. Wear cut-proof
gloves when handling the blade.
REPLACING THE SAW BLADE
Arbor Lock
Fig. 25
1
2
Fig. 26
1
Summary of Contents for TT1015
Page 38: ...38 NOTES ...
Page 39: ...39 NOTES ...