![background image](http://html1.mh-extra.com/html/welltech/wpoe-2426/wpoe-2426_user-manual_955982157.webp)
Port :
The Port column shows the list of ports for which you can configure GARP settings. There
are 2 types of configuration settings which can be configured on per port bases.
•
Timer Values
•
Application
•
Attribute Type
•
GARP Applicant
Timer Values :
To set the GARP join timer, leave timer and leave all timers, unit is Micro-second.
Three different timers can be configured on this page:
Join Timer :
The default value for Join timer is 200ms.
Leave Timer :
The range of values for Leave Time is 600-1000ms. The default value
for Leave Timer is 600ms.
Leave All Timer :
The default value for Leave All Timer is 10000ms.
Application :
Currently only supported application is GVRP.
Attribute Type :
Currently only supported Attribute Type is VLAN.
GARP Applicant
This configuration is used to configure the Applicant state machine behavior for GARP on a
particular port locally.
•
normal-participant:
In this mode the Applicant state machine will operate normally in
GARP protocol exchanges.
•
non-participant:
In this mode the Applicant state machine will not participate in the
protocol operation.
The default configuration is normal participant.
Buttons:
Save
– Click to save changes.
Reset-
Click to undo any changes made locally and revert to previous saved
values.