Publication date: August, 2012
Revision 1.0
Welltech Technology Co., Ltd.
202
4-2 ARP Inspection
The section describes to configure the ARP Inspection parameters of the switch. You could
use the ARP Inspection configure to manage the ARP table.
4-2.1 Configuration
This section describes how to configure ARP Inspection setting including
:
Mode (Enabled and Disabled)
Port (Enabled and Disabled)
Web Interface
To configure an ARP Inspection Configuration in the web interface:
1. Select “Enabled” in the Mode of ARP Inspection Configuration.
2. Select “Enabled” of the specific port in the Mode of Port Mode Configuration.
3. Click Save.
Figure 4-2.1: The ARP Inspection Configuration