manualshive.com logo in svg

WELLTECH WPoE-2426, User Manual

Share
Download
WELLTECH WPoE-2426 User Manual Download Page 141

 

3-11.3 Switch Status    

The function Switch Status gathers the information of all VLAN  status and reports it by the 

order of Static NAS MVRP MVP Voice VLAN MSTP GVRP Combined. 

 

         Web Interface  

To 

Display 

VLAN membership status and the web interface: 

1.   Click VLAN membership. 

2.   Specify 

the 

Static NAS MVRP MVP Voice VLAN MSTP GVRP Combined

.

 

3.  

Display 

membership information. 

 

Figure 3-11.3:  The VLAN Membership Status for Combined users

 

 

 

Parameter description: 

VLAN USER (You can scroll to select one kind of VLAN user as below:) 

VLAN User module uses services of the VLAN management functionality to configure VLAN 

memberships and VLAN port configurations such as PVID and UVID. Currently we support 

the following VLAN user types:  

Web/SNMP :

 These are referred to as static.  

NAS :

  NAS provides port-based authentication, which involves communications between a 

Supplicant, Authenticator, and an Authentication Server.  

MVRP :

  Multiple VLAN Registration Protocol (MVRP) allows dynamic registration and 

deregistration of VLANs on ports on a VLAN bridged network.  

GVRP :

  GARP VLAN Registration Protocol (GVRP) allows dynamic registration and 

deregistration of VLANs on ports on a VLAN bridged network.  

Voice VLAN : 

Voice VLAN is a VLAN configured specially for voice traffic typically originating 

from IP phones.  

MVR :

 MVR is used to eliminate the need to duplicate multicast traffic for subscribers in each 

VLAN. Multicast traffic for all channels is sent only on a single (multicast) VLAN.  

MSTP :

 The 802.1s Multiple Spanning Tree protocol (MSTP) uses VLANs to create multiple 

spanning trees in a network, which significantly improves network resource utilization while 

maintaining a loop-free environment.  

 

VLAN ID : 

Indicates the ID of this particular VLAN. 

 

VLAN Membership : 

The VLAN Membership Status Page shall show the current VLAN port members for all 

VLANs configured by a selected VLAN User (selection shall be allowed by a Combo Box). 

When ALL VLAN Users are selected, it shall show this information for all the VLAN Users, 

and this is by default. VLAN membership allows the frames classified to the VLAN ID to be 

forwarded on the respective VLAN member ports.  

 

Auto-refresh : 

To evoke the auto-refresh icon then the device will refresh the information automatically.

 

 

Upper right icon (Refresh):  

You can click them for refresh the VLAN entries by manual. 

 

Summary of Contents for WPoE-2426

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands