3-22 Trap Event Severity
The function, is used to set an Alarm trap and get the Event log. The Trap Events onfiguration
function is used to enable the switch to send out the trap information while pre-defined trap
events occurred.
Web Interface
To configure the Trap Event Severity Configuration in the web interface:
1. Click Configuration, Trap Event Severity Configuration.
2. Scroll to select the Group name and Severity Level.
3. Click the save to save the setting.
4. If you want to cancel the setting then you need to click the Reset button.
It will revert to previous saved values.
Figure 3-22.1: The Trap Event Severity Configuration
Parameter description:
Group Name :
The field describes the Trap Event determination.
Severity Level :
To scroll to select the event type with “Emerg, Alert, Crit, Error, Warming, Notice, Info and
Debug”.
Buttons:
Save
– Click to save changes.
Reset-
Click to undo any changes made locally and revert to previous saved
values.