WELLTECH WPoE-2426 User Manual Download

Page: 142 / 280

Publication date: August, 2012

Revision 1.0

Welltech Technology Co., Ltd.

130

3-11.4 Port Status

The function Port Status gathers the information of all VLAN status and reports it by the order

of Static NAS MVRP MVP Voice VLAN MSTP GVRP Combined.

Web Interface

Displa

y VLAN Port Status and the web interface:

1. Click VLAN Port Status.

2. Specify

the

Static NAS MVRP MVP Voice VLAN MSTP GVRP Combined

Display

Port Status information.

Figure 3-11.4: The VLAN Port Status for Static user

Parameter description:



Port :

The logical port for the settings contained in the same row.



PVID :

Shows the VLAN identifier for that port. The allowed values are 1 through 4095. The

default value is 1.



Port Type :

Shows the Port Type. Port type can be any of Unaware, C-port, S-port, Custom S-port.
If Port Type is Unaware, all frames are classified to the Port VLAN ID and tags are not

removed. C-port is Custom Port. S-port is Service port. Custom S-port is S-port with

Custom TPID.



Ingress Filtering :

Shows the ingress filtering on a port. This parameter affects VLAN ingress processing. If

ingress filtering is enabled and the ingress port is not a member of the classified VLAN, the

frame is discarded.



Frame Type :

Shows whether the port accepts all frames or only tagged frames. This parameter affects

VLAN ingress processing. If the port only accepts tagged frames, untagged frames

received on that port are discarded.



Tx Tag :

Shows egress filtering frame status whether tagged or untagged.

Summary of Contents for WPoE-2426

























































































































































































































































































Search results

Summary of Contents for WPoE-2426

Reviews:

Related manuals for WPoE-2426

Brands by name

Popular brands

WELLTECH WPoE-2426, User Manual

Search results

Summary of Contents for WPoE-2426

Reviews:

Related manuals for WPoE-2426

Brands by name

Popular brands