Power Supply Configuration
Primary Power Supply [W] :
The switch can have PoE power supplies. It is used as power source, being able to
determine the amount of power the PD has used. It must be defined what amount of power
the sources can deliver.
Ethernet Port Configuration
Port :
This is the logical port number for this row.
PoE State:
The PoE Mode represents the PoE operating mode for the port.
Disabled:
PoE disabled for the port.
Enabled
: Enables PoE IEEE 802.3af/at
Priority :
The Priority represents the ports priority. There are three levels of power priority named
Low, High and Critical.
The priority is used in the case where the remote devices require more power than the
power supply can deliver. In this case the port with the lowest priority will be turn off starting
from the port with the highest port number.
Maximum Power :
The Maximum Power value contains a numerical value that indicates the maximum power
in watts that can be delivered to a remote device.
N
OTE
:
If you want to set the Port support IEEE802.3at, then
you can set the Maximum allowed value is 30W.
Buttons:
Save
– Click to save changes.
Reset-
Click to undo any changes made locally and revert to previous saved
values.
