![background image](http://html1.mh-extra.com/html/welltech/wpoe-2426/wpoe-2426_user-manual_955982100.webp)
Publication date: August, 2012
Revision 1.0
Welltech Technology Co., Ltd.
88
3-6.2 VLAN Configuration
When MLD snooping is enabled on a VLAN, the switch acts to minimize unnecessary
multicast traffic. If the switch receives multicast traffic destined for a given multicast address, it
forwards that traffic only to ports on the VLAN that have MLD hosts for that address. It drops
that traffic for ports on the VLAN that have no MLD hosts
It will use the last entry of the current displayed entry as a basis for the next lookup. When the
end is reached the text "No more entries" is shown in the displayed table. Use the button to
start over.
Web Interface
To configure the MLD Snooping VLAN Configuration in the web interface:
1. Click Configuration, MLD Snooping, VLAN Configuration.
2. Specify the VLAN ID with entries per page.
3. Click “ Refresh“ to refresh an entry of the MLD Snooping VLAN
Configuration Information.
4. Click “<< or >> “ to move to previous or next entry.
Figure 3-7.2: The MLD Snooping VLAN Configuration.
Parameter description:
VLAN ID :
The VLAN ID of the entry.
Snooping Enabled :
Enable the per-VLAN MLD Snooping. Only up to 32 VLANs can be selected.
MLD Querier :
A router sends MLD Query messages onto a particular link. This Router is called the
Querier.. Enable the MLD Querier in the VLAN.
Compatibility :
Compatibility is maintained by hosts and routers taking appropriate actions depending on
the versions of MLD operating on hosts and routers within a network. The allowed selection
is MLD-Auto, Forced MLDv1, Forced MLDv2, default compatibility value is MLD-Auto.
Rv :
Robustness Variable. The Robustness Variable allows tuning for the expected packet loss
on a network. The allowed range is 1 to 255; default robustness variable value is 2.
QI :
Query Interval. The Query Interval is the interval between General Queries sent by the
Querier. The allowed range is 1 to 31744 seconds; default query interval is 125 seconds.
QRI :
Query Response Interval. The Maximum Response Delay used to calculate the Maximum
Response Code inserted into the periodic General Queries. The allowed range is 0 to