![background image](http://html1.mh-extra.com/html/welltech/wpoe-2426/wpoe-2426_user-manual_955982070.webp)
Publication date: August, 2012
Revision 1.0
Welltech Technology Co., Ltd.
58
3-3.2.3 Port Status
This section describes that when you complete to set LACP function on the switch then it
provides a Port Status overview for all LACP instances
Web Interface
To display the LACP Port status in the web interface:
1. Click Configuration, LACP, Port Status
2. If you want to auto-refresh the information then you need to evoke the
“Auto-refresh”.
3. Click “ Refresh“ to refresh the LACP Port Status.
Figure 3-3.2.3: The LACP Status
Parameter description:
Port :
The switch port number.
LACP :
'Yes' means that LACP is enabled and the port link is up. 'No' means that LACP
is not enabled or that the port link is down. 'Backup' means that the port could
not join the aggregation group but will join if other port leaves. Meanwhile it's
LACP status is disabled.
Key :
The key assigned to this port. Only ports with the same key can aggregate
together.
Aggr ID :
The Aggregation ID assigned to this aggregation group. IDs 1 and 2 are GLAGs
while IDs 3-14 are LLAGs.
Partner System ID :
The partner's System ID (MAC address).
Partner Port :
The partner's port number connected to this port.