Welch Allyn PneumoCheck 61000, Service Manual

Page: 8 / 90

Service Manual 610132 Rev. E Pneumocheck Handle Printer/Charger 7
When not in use, the handheld spirometer sits-in the
cradle of the printer base (or it is connected to an outlet
via a DC power adapter,) and the battery is charged.
The battery indicator light remains on whenever a
source of charge current is present. The spirometer
becomes operational when it is lifted from the printer
base or disconnected from the DC adapter. The
spirometer is functional only while disconnected from
the charger or printer base and the ON/OFF switch is
ON. The word SELECT appears on the display and the
device waits for a keypress from the operator.
When the word SELECT is on the display, you can do
one to the following:
1. Press the test key which will start the sequence
for doing an FVC test, and MVV test, or a
calibration of the spirometer.
2. Press the DATA key which will display the test
values of the best test of a test is currently
stored in the spirometer’s memory.
3. Put the spirometer back into the printer cradle
which will start the sequence for transmitting
any test data in the spirometer’s memory to the
printer’s memory, and then resume charging
the battery.
4. Connect the spirometer to the DC power
adapter, which will resume charging the battery.
5. Turn the unit off using the ON/OFF slide switch.
A more detailed description of the operation of the
spirometer is contained in the Operator’s Manual.
Section 1 - General Information