Welbilt Convotherm OES mini easyTouch Installation Manual Download Page 90

Page: 90 / 106

Personal protective equipment

Wear the personal protective equipment specified in the section 'Personal protective equipment' on

page 39 of the 'For your safety' chapter for the relevant tasks.

Live parts

Risk of electric shock from live parts and loose cables
When the cover is open, there is a risk of electric shock from touching live parts.

Make sure that any work on the electrical system is performed solely by a qualified electrician from

an authorized customer service office.

Make sure that the appliance is disconnected from the power supply before removing the covers.

Take protective measures to ensure the appliance cannot be switched on again.

Moving heavy loads

Risk of injury from lifting incorrectly
When lifting the appliance, the weight of the appliance may lead to injuries, especially in the area of

the torso.

Use a fork-lift truck/pallet truck or suitable lifting gear to move the appliance.

When lifting the appliance, use enough people for the weight of the appliance (guide value: 15 to

55 kg max., depending on age and gender). Observe the local occupational safety regulations.

Wear personal protective equipment.

Unsuitable supporting surface

Risk of crushing if the appliance tips over or falls off
Body parts can be crushed if the appliance tips over or falls off.

Make sure that the appliance is never placed on an unsuitable supporting surface.

Contact with cleaning agents

Risk of chemical burns or irritation to skin, eyes and respiratory system.
Direct contact with the ConvoClean new cleaning agent or ConvoCare rinse aid will irritate the skin,

eyes and respiratory system. Direct contact with the ConvoClean forte cleaning agent will result in

chemical burns to the skin, eyes and respiratory organs.

Do not inhale the vapours or spray mist from the cleaning agent and rinse aid.

Do not let the cleaning agent or rinse aid come into contact with skin, eyes or mucous membranes.

Follow the guidance on the cleaning-fluid labels and in the relevant data sheets when using the

cleaning agents.

Wear personal protective equipment.

8 Removal from service and disposal

Installation manual

Summary of Contents for Convotherm OES mini easyTouch











































































































Search results

Summary of Contents for Convotherm OES mini easyTouch

Reviews:

Related manuals for Convotherm OES mini easyTouch

Brands by name

Popular brands

Welbilt Convotherm OES mini easyTouch, Installation Manual

Search results

Summary of Contents for Convotherm OES mini easyTouch

Reviews:

Related manuals for Convotherm OES mini easyTouch

Brands by name

Popular brands