5.12 Installing appliances in a wheeled stacking kit
Rules for installing the appliances safely in the wheeled stacking kit
Observe the following rules to ensure that the stacking kit fitted with appliances is stable:
■
It is only permitted to fit appliances of similar weight in the top and bottom of the stacking kit.
■
The stacking kit must never contain an appliance only in the top half.
■
It must be possible to set up the stacking kit in the installation position so that it cannot tip over or
slide about. The subfloor must satisfy relevant requirements.
■
For appliances on a wheeled supporting structure, a retaining device must be connected to limit the
range of movement of the assembly (supporting structure plus appliance) at the customer's site.
The maximum distance that the supporting structure plus appliance can be pulled out is 0.5 m.
The lengths of the supply cables and pipes must accommodate the range of movement allowed by
the retaining device. When moving the assembly, never strain or wheel over the supply cables and
pipes.
■
It must be possible to lock the wheels on the supporting structure
Installing the appliances in the stacking kit
Fit and install the appliances in the wheeled stacking kit in accordance with the separate fitting and
installation instructions.
5 Setting up the appliance
Installation manual
59
Summary of Contents for Convotherm OES mini easyTouch
Page 1: ...Combi oven Read instructions before use OES mini easyTouch Installation manual Original ENG ...
Page 2: ......
Page 105: ......
