Welbilt Convotherm OES mini easyTouch Installation Manual Download Page 104

Page: 104 / 106

10.4 Completion of the installation

Warranty

In order to be able to claim under the warranty for the combi oven, the appliance must be installed in

accordance with the instructions in this installation manual by a qualified service engineer from an au‐

thorized service company. The manufacturer must be in receipt of a fully completed checklist before a

warranty claim can be dealt with.
The warranty does not cover damage resulting from improper setup, installation, use, cleaning, use of

cleaning agents, servicing, repair or descaling.

Confirmation that appliance is ready for use

The appliance has been installed by skilled personnel (from an authorized customer service office) in

accordance with the requirements given in this installation manual and with relevant local regulations.

Date

Name of appliance installer (block letters)

Signature of appliance installer

Confirmation of guidance given to customer

The customer documentation has been handed to the customer / user. The customer has been in‐

formed of the important chapters as listed under Checklist: customer guidance and instruction.

Date

Name of customer (block letters)

Signature of customer

Return of documentation

Please return the completed checklist to:

Convotherm Elektrogeräte GmbH
Welbilt
After Sales Service
Talstraße 35
82436 Eglfing
Germany

10 Checklists and completion of installation

Installation manual

104

Summary of Contents for Convotherm OES mini easyTouch











































































































Search results

Summary of Contents for Convotherm OES mini easyTouch

Reviews:

Related manuals for Convotherm OES mini easyTouch

Brands by name

Popular brands

Welbilt Convotherm OES mini easyTouch, Installation Manual

Search results

Summary of Contents for Convotherm OES mini easyTouch

Reviews:

Related manuals for Convotherm OES mini easyTouch

Brands by name

Popular brands