Welbilt Convotherm OES mini easyTouch, Installation Manual

Page: 84 / 106

To ensure operational and functional safety, all electrical connections must be checked and all manda‐
tory electrical tests required for putting the appliance into service and operating the appliance must be
carried out.
Basic rules for safe operation
If it is known or evident that the combi oven has been moved after installation without authorization
(whether intentionally or unintentionally), the appliance must not be put back into service until all the
following requirements have been met:
■
The appliance and fittings or accessories being used show no signs of damage.
■
The installed electrical power cables, water supply pipes and pipes for wastewater (with the Convo‐
Clean system option, also for cleaning agent) show no signs of damage, are fixed securely, are not
leaking from any point and appear safe and in working order on visual inspection.
■
The 'Requirements relating to the operating condition of the combi oven' on page 17 are met.
■
The 'Requirements relating to the operating environment of the combi oven' on page 17 are met.
■
All warning signs are in their designated position.
Rules for safe operation of the appliance
To avoid hazards, the following rules must be observed during operation:
■
For 6.06/6.10/10.10 mini: The air vent and the ventilation port on the top of the appliance, the venti‐
lation slots on the rear of the appliance and the gap on the front of the appliance between the feet
must not be covered, obstructed or blocked.
■
For 6.10 mini 2in1: The air vent on the top of the appliance, the ventilation slots on the rear of the
appliance and the ventilation slots in the appliance floor must not be covered, obstructed or
blocked.
■
The racks must be attached securely.
■
The food containers must be inserted correctly; see 'Loading and removing food' in the User man‐
ual.
■
The suction panel must be secured properly in place.
Additional rules for safe operation of the appliance on a mobile supporting structure (6.06/6.10/10.10 mini)
To avoid hazards, the following rules must be observed when operating appliances positioned on a
wheeled supporting structure:
■
The retaining device for restricting the range of movement of the assembly (supporting structure
plus appliance) must be connected at all times.
Check every day before use that the retaining device is connected.
■
The parking brakes on the front wheels must always be engaged when operating the appliances.
■
Check that the wheel brakes are on before operation each day.
Personal protective equipment
Wear the personal protective equipment specified in the section 'Personal protective equipment' on
page 39 of the 'For your safety' chapter for the relevant tasks.
Live parts
Risk of electric shock from live parts
When the cover is open, there is a risk of electric shock from touching live parts.
Make sure that any work on the electrical system is performed solely by a qualified electrician from
an authorized customer service office.
Make sure that the appliance is disconnected from the power supply before removing the covers.
Take protective measures to ensure the appliance cannot be switched on again.
Before putting the appliance into service, make sure that the electrical connections are intact and
connected securely and that the stipulated electrical tests have been carried out and passed.
7 Putting into service
Installation manual 84