Welbilt Convotherm OES mini easyTouch Installation Manual Download Page 78

Page: 78 / 106

6.3 Installing the ConvoClean system

Purpose of this section

This section shows you how to install the ConvoClean fully automatic oven cleaning system.

6.3.1

Safe working when installing the ConvoClean system

For your safety

Before starting work, familiarize yourself with the hazards described in Hazards and safety precautions

during installation on page 25.

Eligibility of personnel for installing the ConvoClean system

Only skilled personnel from an authorized customer service office are permitted to connect the appli‐

ance.

Personal protective equipment

Wear the personal protective equipment specified in the section 'Personal protective equipment' on

page 39 of the 'For your safety' chapter for the relevant tasks.

Contact with cleaning agents

Risk of chemical burns or irritation to skin, eyes and respiratory system.
Direct contact with the ConvoClean new cleaning agent or ConvoCare rinse aid will irritate the skin,

eyes and respiratory system. Direct contact with the ConvoClean forte cleaning agent will result in

chemical burns to the skin, eyes and respiratory organs.

Do not inhale the vapours or spray mist from the cleaning agent and rinse aid.

Do not let the cleaning agent or rinse aid come into contact with skin, eyes or mucous membranes.

Follow the guidance on the cleaning-fluid labels and in the relevant data sheets when using the

cleaning agents.

Wear personal protective equipment.

6 Installation

Installation manual

Summary of Contents for Convotherm OES mini easyTouch











































































































Search results

Summary of Contents for Convotherm OES mini easyTouch

Reviews:

Related manuals for Convotherm OES mini easyTouch

Brands by name

Popular brands

Welbilt Convotherm OES mini easyTouch, Installation Manual

Search results

Summary of Contents for Convotherm OES mini easyTouch

Reviews:

Related manuals for Convotherm OES mini easyTouch

Brands by name

Popular brands