Safety hazard: mechanical parts of the appliance
When setting up the appliance, be aware of the following hazards and take the specified preventive
actions:
Danger
Where or in what situations
does the hazard arise?
Preventive action
Safety device
Risk of body parts be‐
ing crushed if the appli‐
ance is dropped
When lifting the appliance
■
Make sure center of grav‐
ity is balanced
■
Avoid jolts
None
For 6.06/6.10/10.10
mini:
Risk of crushing due to
loss of appliance stabili‐
ty if the appliance is
mounted on a stand or
in a stacking kit
■
When installing the appli‐
ance on the oven stand
■
When fitting the appliances
in the stacking kit
■
When a heavy load is ap‐
plied to the top appliance
alone
■
Never exert an extra
pressure on the applian‐
ces, e.g. by leaning on
the open appliance door
■
Before fitting the applian‐
ces in a wheeled stacking
kit, secure the stacking kit
by engaging the parking
brake on the wheels
■
Always fit the bottom ap‐
pliance first in the stack‐
ing kit
■
Make sure that the appli‐
ances are seated correct‐
ly in the stacking kit
Parking brake
on wheeled
stacking kit
Risk of body parts be‐
ing crushed if the appli‐
ance tips over or falls
off
When installing the appliance
on the floor
Always observe the re‐
quirements for the support‐
ing surface while setting up
the appliance; see Require‐
ments for the installation lo‐
None
Risk of cuts from sharp
edges
When handling sheet-metal
parts
■
Exercise caution when
performing these tasks
■
Wear personal protective
equipment as specified in
safety regulations
None
3 For your safety
Installation manual
24
Summary of Contents for Convotherm OES mini easyTouch
Page 1: ...Combi oven Read instructions before use OES mini easyTouch Installation manual Original ENG ...
Page 2: ......
Page 105: ......
