Welbilt Convotherm mini black easyTouch 10.10, Installation Manual

Page: 106 / 148

Safety hazard: mechanical unit components
When removing the unit from service, keep the following hazards in mind and take the actions re‐
quired in order to eliminate and/or minimize these hazards:
Risk / hazard Where and in which situa‐
tions will the risk/hazard ex‐
ist?
What to do Safety device
Crush hazard posed by
a loss of unit stability if
the unit is set up in a
stacking kit or on an
equipment stand
■
When removing the unit
from the equipment stand
■
When removing units from
a stacking kit
■
If the top is subjected to a
heavy uneven load
■
Do not, under any cir‐
cumstance, subject the
units to additional loads
(on the open unit door,
for example)
■
Always remove the top
unit from the stacking kit
first
■
Before removing units
from a stacking kit with
casters, lock the casters'
wheels
Brake and
swivel lock
when using a
stacking kit
with casters
Safety hazard: cleaning agents
Risk / hazard Where and in which situa‐
tions will the risk/hazard ex‐
ist?
What to do Safety device
Skin, eye, and respira‐
tory tract irritation haz‐
ard as a result of con‐
tact with cleaning
agents and their vapors
■
When removing the clean‐
ing system
■
When disposing of the de‐
vice
■
Wear the required per‐
sonal protective equip‐
ment
■
Observe the instructions
and warnings on the
cleaning agent labels and
in the relevant safety da‐
ta sheets
None
3 For Your Safety
Installation Manual 31