Welbilt Convotherm mini black easyTouch 10.10 Installation Manual Download Page 64

Page: 64 / 148

Contact with cleaning agents

Risk of chemical burns and skin, eye, and respiratory tract irritation
The ConvoClean new cleaning agent and the ConvoCare rinse aid will cause skin, eye, and

respiratory tract irritation upon direct contact. The ConvoClean forte cleaning agent will result in

chemical burns to the skin, eyes, and respiratory tract upon direct contact.

Do not inhale the cleaning agents' and rinse aid's vapors or mist.

Do not let the cleaning agents or rinse aid come into contact with your eyes, skin, or mucous

membranes.

Do not spray cleaning agents or rinse aid into a oven cavity that is at a temperature higher than

140°F, as doing so will cause more caustic and/or irritating cleaning-fluid vapors to be produced.

Wear the required personal protective equipment.

7 Placing into operation

Installation Manual

Summary of Contents for Convotherm mini black easyTouch 10.10





















































































































































Search results

Summary of Contents for Convotherm mini black easyTouch 10.10

Reviews:

Related manuals for Convotherm mini black easyTouch 10.10

Brands by name

Popular brands

Welbilt Convotherm mini black easyTouch 10.10, Installation Manual

Search results

Summary of Contents for Convotherm mini black easyTouch 10.10

Reviews:

Related manuals for Convotherm mini black easyTouch 10.10

Brands by name

Popular brands