Welbilt Convotherm mini black easyTouch 10.10, Installation Manual

Page: 122 / 148

5.6 Setting up the unit on a work table
Rules for safely setting up the unit
Observe the following rules in order to ensure that the unit will have the required stability:
■
It must be possible to set up the work table at the installation location in such a way that it will not
topple over or shift. All supporting surface requirements must be met.
■
The unit must be set up on the work table's surface in such a way that it will not topple over or shift.
Setting up the unit on a work table
Follow the steps below when setting up the unit on a work table:
Step Procedure Figure
1
Place the unit on the work table.
1 2
Use the unit's height-adjustable feet (1) to level the
unit.
Use a spirit level to make sure that the unit is properly
leveled.
5 Setup
Installation Manual 47