![background image](http://html1.mh-extra.com/html/wave-wireless-networking/speedlan-4100/speedlan-4100_installation-and-operation-user-manual_3801605089.webp)
SPEEDLAN 4100 & 4200 Installation and Operation User Guide
SNMP Monitoring
11-11
Note:
A high number of re-transmit errors usually indicates that the signal quality is poor.
•
Failure
Number of transmission failures from the wireless station.
Note:
Click
RF Stats
to view the radio frequency statistics for the wireless station connected to
the brouter (as shown below). Then, click
Back
to return to this dialog box.
•
Station Name
Name of the brouter.
•
Signal
The higher the Signal Level, the better. This ratio should be between 50 to 70%. In order for
the link to be successful, you should have approximately 20 points higher than the noise.
•
Noise
The higher the Signal Level, the better. This ratio should be between 50 to 70%. In order for
the link to be successful, you should have approximately 20 points higher than the noise.
Summary of Contents for SPEEDLAN 4100
