![background image](http://html1.mh-extra.com/html/wave-wireless-networking/speedlan-4100/speedlan-4100_installation-and-operation-user-manual_3801605106.webp)
SPEEDLAN 4100 & 4200 Installation and Operation User Guide
12-2
Tables
To monitor the SNMP results, choose the appropriate selection by choosing
Monitor
(on the
SPEEDLAN Config
Advanced
+ your selection.
System Information
System Information displays information about the brouter's Management Information Base Group.
The brouter keeps the standard SNMP MIB II statistics on system-related information as indicated
below.
•
Name
An administratively-assigned name for this managed node. By convention, this is the node's
fully-qualified domain name.
•
Location
The physical location of this node (e.g., `telephone closet, 3rd floor').
•
Contact
The name/position of the contact person for this managed node, together with information
on how to contact this person.
•
Description
This value contains the full name and version identification of the system's hardware type,
software operating system, and network software.
•
Up time
The time since the network-management portion of the system was last re-initialized.
•
Services
The number of services handled by the brouter.
•
Object ID
The identification number of the brouter.
TIP
Summary of Contents for SPEEDLAN 4100
