Wave Wireless Networking SPEEDLAN 4100, Installation And Operation User Manual, Page: 116 / 167

SPEEDLAN 4100 & 4200 Installation and Operation User Guide
13-2 Analyzing Wireless Equipment
Select Another Device
Use this feature to select another pair of bridges, routers or remote brouters. This is a helpful
feature when running a wireless link test. Note that you must scan the brouter before selecting
another device.
To select another wireless device, do the following:
1 From the Analyze , menu, choose Select Another Device .
2 The Enter IP Address dialog box appears.
3 Verify the information in the Enter IP Address dialog box and click Scan . This opens the
Scan dialog box, which allows you to select the new pair.
4 Select the pair and click OK . Verify the Remote and IP Address and Read/Write Password in
the Enter IP Address dialog box. Then, click OK . The SPEEDLAN Configurator confirms that
the device was located. Click OK again. You have successfully selected another device and
test the pair as needed.