
SPEEDLAN 4100 & 4200 Installation and Operation User Guide
SNMP Monitoring
11-7
•
In discards
The number of inbound packets to which were chosen to be discarded even they were
deliverable to a higher-layer protocol. One possible reason for discarding such a packet
could be to free up buffer space.
•
In errors
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
•
Unknown protocols
The number of packets received via the interface which were discarded because of an
unknown or unsupported protocol.
•
Out octets (bytes)
The total number of octets (bytes) transmitted out of the interface, including framing
characters.
•
Out unicast packets
The total number of packets that higher-layer protocols requested be transmitted to a sub-
network-unicast address, including those that were discarded or not sent.
•
Out non-unicast packets
The total number of packets that higher-layer protocols requested be transmitted to a non-
unicast (i.e. a subnetwork-broadcast or subnetwork-multicast) address, including those that
were discarded or not sent.
•
Out errors
The number of outbound packets that contained errors preventing them from being
transmitted via this interface.
•
Output queue length
The total number of octets (bytes) waiting to be transmitted via this interface.
Summary of Contents for SPEEDLAN 4100
