Wave Wireless Networking SPEEDLAN 4100, Installation And Operation User Manual

Page: 75 / 167

SPEEDLAN 4100 & 4200 Installation and Operation User Guide
SNMP Setup 9-3
•
System Name
This field should contain the administratively assigned name for this managed node. By
convention, this is the node's fully qualified Internet Domain name (e.g.,
"bridge20.speedlan.com").
•
System Location
This field should contain the physical location of this node. (e.g., "telephone closet, 3rd
floor").
•
Trap Host IP Address
This is the IP address of a network-connected host that is set up to receive SNMP Trap mes-
sages from this brouter. If you do not have an SNMP Trap Host, set this to 0.0.0.0.
•
Trap Host Password
This is the SNMP read/write password (community name) of the host that is set up to receive
SNMP Trap messages. This field is ignored if the Trap Host IP Address described above is
0.0.0.0.
•
SNMP IP Access List
You can optionally set up a list of networks, subnets, and hosts that are authorized to access
the brouter via SNMP.
To modify the SNMP Access List, click Add , Delete , or Edit .
TIP