SPEEDLAN 4100 & 4200 Installation and Operation User Guide
12-10
Tables
Local IP-Address Table
The table displays addressing information that is relevant to the entity’s IP addresses.
•
Intf
The interface to which the entry is applicable.
•
IP Address
The IP address to which this entry's addressing information pertains.
•
Subnet Mask
The subnet mask associated with the IP address of this entity. The value of the mask is an IP
address with all the network bits set to 1 and all the host bits set to 0.
•
Broadcast Address
The value of the least-significant bit in the IP broadcast address used for sending datagrams
on the logical interface associated with the IP address of this entry. For example, when the
Internet standard all-ones broadcast address is used, the value will be 1. This value applies
to both the subnet- and network-broadcast address used by the entity on this logical
interface.
•
Reasm Max
The size of the largest IP datagram which this entity can re-assemble from incoming IP
fragmented datagrams received on this interface.
Summary of Contents for SPEEDLAN 4100
