
SPEEDLAN 4100 & 4200 Installation and Operation User Guide
Tables
12-7
•
Subnet Mask
Indicates the mask to be a logical-ANDed with the destination address before being com-
pared to the value in the Destination field. For systems that do not support arbitrary subnet
masks, an agent constructs the value of the Subnet Mask by determining whether the value
of the correspondent Destination field belongs to a Class A, B, or C network.
•
Route Type
Type of route. This can be:
•
other
none of the following
•
invalid
an invalidated route
•
direct
route to directly connected (sub-)network
•
indirect
route to a non-local host/network/subnetwork.
•
Route Protocol
The routing mechanism by which this route was learned. Inclusion of values for gateway-
routing protocols is not intended to imply that hosts should support those protocols. The
values are as follows:
•
other
none of the following
•
local
non-protocol information
•
netmgmt
entries set via a network-management protocol
•
icmp
obtained via ICMP (e.g., ICMP `redirect')
•
egp
all gateway-routing protocols
•
ggp
all gateway-routing protocols
•
Route Metric
The primary routing metric for this route. The semantics of this metric are determined by the
routing protocol specified in the route's Route Protocol value. If this metric is not used, its
value should be set to -1.
Summary of Contents for SPEEDLAN 4100
