Wave Wireless Networking SPEEDLAN 4100, Installation And Operation User Manual

Page: 40 / 167

SPEEDLAN 4100 & 4200 Installation and Operation User Guide
5-10 Configuring SPEEDLAN 4100 & 4200
•
Standard
This setting limits the card by providing 2 Mbps of bandwidth. The receiver sensitivity of
the radio with this setting is -89 dBm.
•
Low
This setting limits the card by providing 1 Mbps of bandwidth. The receiver sensitivity of
the radio with this setting is -92 dBm.
Warning: This setting must be set to the same value for the brouters that will be communicating
together. Failure to set them to the same value will prevent any communications from
taking place.
Frequency Button - 11 Mb Frequency Setup
The Frequency button is located to the right of the Advanced button. Clicking this button will open a
new dialog box that allows you to change the operating frequency of the interface. All of the
brouters expected to communicate with this device must be configured with the same frequency.