To connect the cables:
1.
Insert the connector into the connector port on the module's rear panel.
Figure 5–4: Inserting connector into connector port
Connector port
Connector
2.
Using the flat-blade screwdriver, attach the positive and negative leads of the signal cable
to the connector.
Tip:
Refer to the cable-connection label affixed to the rear panel of the module.
Figure 5–5: Positive and negative lead connections
Screw
Connector
Signal cable
3.
Fit the grounding cable's fork terminal on the rear-panel grounding stud and secure the
terminal using the locking nut.
April 4, 2018, 715005702 Rev. A
Page 75