Waters contact information (continued)
Contacting medium Information
Conventional mail
Waters Corporation
Global Support Services
34 Maple Street
Milford, MA 01757
USA
Safety considerations
Some reagents and samples used with Waters instruments and devices can pose chemical,
biological, or radiological hazards (or any combination thereof). You must know the potentially
hazardous effects of all substances you work with. Always follow Good Laboratory Practice
(GLP), and consult your organization’s standard operating procedures as well as your local
requirements for safety.
System height
Warning:
To avoid injury, do not stack modules, including the solvent tray and rails,
higher than one meter (39.4 inches) above the bench top.
Warning:
To avoid spinal and muscular injury, do not attempt to lift a system module
without assistance.
Warning:
To avoid crushing your fingers beneath or between modules, use extreme
care when installing a module in the system stack.
Safety hazard symbol notice
Documentation needs to be consulted in all cases where the
symbol is used to find out the
nature of the potential hazard and any actions which have to be taken.
Power cord replacement hazard
Warning:
To avoid electric shock, use SVT-type power cords in the United States and
HAR-type (or better) cords in Europe. The power cords must be replaced only with ones
of adequate rating. For information regarding which cord to use in other countries,
contact your local Waters distributor.
April 4, 2018, 715005702 Rev. A
Page iv