Long flats
Compression screw
2-piece stainless steel ferrule
Tighten the fitting finger-tight plus as much as an additional 1/6-turn using a 1/4-inch open-end
wrench.
Reinstalled tightening
2.5.1.3 Stainless steel (gold-plated) fitting with short flats and 2-piece stainless steel
ferrule (V-detail)
First use
Short flats
Compression screw
2-piece stainless steel ferrule
Tighten the fitting finger-tight plus an additional 3/4-turn using a 1/4-inch open-end wrench. For
detailed instructions about assembling new fittings, see
Tip:
To prevent band spreading, ensure that the tubing is fully bottomed in the connection port
before you tighten the compression screw.
April 4, 2018, 715005702 Rev. A
Page 32