Figure 3–2: SM-FTN control panel
Run LED
– Mirrors the run status LED on the sample manager's front panel, unless
communications are interrupted.
Current column compartment temperature
– Displays the current temperature of the
sample compartment.
Display console
– When clicked, launches the console software.
Column compartment temperature set point
– Displays the temperature set point for the
column compartment.
Sample compartment temperature set point
– Displays the temperature set point for the
sample compartment.
Current sample compartment temperature
– Displays the current temperature in the
column compartment.
Status
– Displays the status of the current operation.
You can access these additional functions by right-clicking anywhere in the sample manager
control panel.
Table 3–5: Additional functions in the sample manager control panel
Control panel function
Description
Prime
Displays the Prime dialog box.
Wash needle
Displays the Wash Needle dialog box.
Launch Console
Launches the console software.
Reset SM
Resets the sample manager following an error condition.
Help
Displays the console online Help.
April 4, 2018, 715005702 Rev. A
Page 54