WAGO 750-8212/040-010 Manual Download Page 401

Page: 401 / 434

WAGO-I/O-SYSTEM 750 XTR

Appendix 401

750-8212/040-010 PFC200 G2 2ETH M12 RS XTR

Manual

Version 1.0.0, valid from FW version 03.01.07(13)

17.2.1.7 mod_com.lib

The controller 750-8212/040-010supports the following function blocks of the

“mod_com.lib” library:

ADD_PI_INFORMATION

CRC16

FBUS_ERROR_INFORMATION

GET_DIGITAL_INPUT_OFFSET

GET_DIGITAL_OUTPUT_OFFSET

KBUS_ERROR_INFORMATION

MOD_COM_VERSION

PI_INFORMATION

SET_DIGITAL_INPUT_OFFSET

SET_DIGITAL_OUTPUT_OFFSET

SLAVE_ADDRESS

The document containing a description of this library and the function blocks it

includes is available for download on the Internet at

www.wago.com

17.2.1.8 SerComm.lib

The controller 750-8212/040-010supports the following function blocks of the

“SerComm.lib” library:

SERCOMM

SERCOMM_VERSION

The document containing a description of this library and the function blocks it

includes is available for download on the Internet at

www.wago.com

17.2.1.9 WagoConfigToolLIB.lib

The following table shows call-ups that allow you to configure and parameterize

the controller from the PLC program or Linux

via the “ConfigToolFB” function

block (see parameter “stCallString”). In addition to WBM and the CBM, this is

another variant to configure the controller for operational requirements.

The configuration directory for this under Linux

is:

/etc/config-tools/

Figure 133: Graphical Representation of the “ConfigToolFB” Function Block

Summary of Contents for 750-8212/040-010



















































































































































































































































































































































































































































Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands

WAGO 750-8212/040-010, Manual

Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands