WAGO 750-8212/040-010 Manual Download Page 206

Page: 206 / 434

206 Commissioning

WAGO-I/O-SYSTEM 750 XTR

750-8212/040-010 PFC200 G2 2ETH M12 RS XTR

Manual

Version 1.0.0, valid from FW version 03.01.07(13)

7.8.2.4.9 “TCP/IP” > “DNS Server” Submenu

This submenu contains the settings for the DNS server.

Table 151: “Networking” > “TCP/IP” > “DNS Server” Submenu

Menu Item

Submenu Item / Explanation

0. Back to …

Back to the higher-level menu

n. DNS Server n

The addresses of the defined DNS servers are

displayed. Other submenus are available for the

server entered.
0. Back to … Back to the higher-level menu

1. Edit

You can change the selected DNS

server address.

2. Delete

You can delete the selected DNS

server address.

(n+1). Add new DNS

Server

Add additional DNS server addresses.

You can enter 10 addresses.

To make a selection, choose the appropriate menu item.

To return to the higher-level menu, press

[Q]

Click

[<OK>]

to apply the entry.

Click

[<Abort>]

to discard the entry.

7.8.2.4.10 “Networking” > “Ethernet” Submenu

This submenu contains other submenus with settings for the ETHERNET

configuration.

Table 152: “Networking” > “Ethernet” Submenu

Menu Item

Explanation

0. Back to …

Back to the higher-level menu

1. Switch Configuration

Opens a submenu with settings for the IP

address(es)

2. Ethernet Ports

Opens a submenu with settings for the ETHERNET

interfaces

To make a selection, choose the appropriate menu item.

To return to the higher-level menu, press

[Q]

Summary of Contents for 750-8212/040-010



















































































































































































































































































































































































































































Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands

WAGO 750-8212/040-010, Manual

Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands