256 Run-time System CODESYS 2.3
WAGO-I/O-SYSTEM 750 XTR
750-8212/040-010 PFC200 G2 2ETH M12 RS XTR
Manual
Version 1.0.0, valid from FW version 03.01.07(13)
10. You can select a module in the new “Module selection” window that then
appears.
Figure 65: “Module Selection” Window
11. You can change the position of an I/O module by marking it and then using
the arrow buttons at the right edge of the window to move it up or down.
Figure 66: I/O Configurator with Defined I/O Modules
12. Use
[Import configuration from file]
to add a configuration imported
previously using WAGO-I/O-
CHECK
.
