WAGO 750-8212/040-010 Manual Download Page 255

Page: 255 / 434

WAGO-I/O-SYSTEM 750 XTR

Run-time System CODESYS 2.3 255

750-8212/040-010 PFC200 G2 2ETH M12 RS XTR

Manual

Version 1.0.0, valid from FW version 03.01.07(13)

The detected I/O modules then appear in the configuration window.

Passive I/O Modules

Remember that passive I/O modules, such as a power supply module (750-602)

or end module (750-600) will not be shown in the I/O configurator.

Figure 63: I/O Configurator Empty

You can use the

[Add]

button to add new I/O modules to manually define

or change the configuration.

Figure 64: “Add I/O Modules” Button

Summary of Contents for 750-8212/040-010



















































































































































































































































































































































































































































Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands

WAGO 750-8212/040-010, Manual

Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands