198 Commissioning
WAGO-I/O-SYSTEM 750 XTR
750-8212/040-010 PFC200 G2 2ETH M12 RS XTR
Manual
Version 1.0.0, valid from FW version 03.01.07(13)
7.8.2.3.5 “Information” > “Number of Tasks” Submenu
In this submenu, the number of tasks in the PLC program are displayed.
The submenu only appears when CODESYS 2 is enabled as the runtime system.
Table 134: “PLC Runtime” > “Information” > “Number of Tasks” Submenu
Parameters
Explanation
Number of Tasks
The number of tasks in the PLC program is shown.
To return to the higher-level menu, press
[Q]
or
[Return]
.
7.8.2.3.6 “Information” > “Project Details” Submenu
In this submenu, project information from the PLC program is displayed.
The submenu only appears when CODESYS 2 is enabled as the runtime system
and the program is executed.
Table 135: “PLC Runtime” > “Information” > “Project Details” Submenu
Parameters
Explanation
Date
Display of project information that the programmer
entered in the PLC program (in the programming
software under Project > Project Information ...)
Descriptive text with up to 1024 characters is
displayed under “Description”.
Title
Version
Author
Description
To return to the higher-level menu, press
[Q]
or
[Return]
.
7.8.2.3.7 “Information” > “Tasks” Submenu
In this submenu, tasks from the PLC program are displayed. An entry is
generated for each task.
The submenu only appears when CODESYS 2 is enabled as the runtime system.
Table 136: “PLC Runtime” > “Information” > “Tasks” Submenu
Menu Item
Explanation
0. Back to …
Back to the higher-level menu
n. Task n
Opens a submenu with information on the selected
task
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press
[Q]
.
