WAGO 750-8212/040-010 Manual Download Page 104

Page: 104 / 434

104 Connect Devices

WAGO-I/O-SYSTEM 750 XTR

750-8212/040-010 PFC200 G2 2ETH M12 RS XTR

Manual

Version 1.0.0, valid from FW version 03.01.07(13)

6.4.2

Grounding Function

The grounding function increases the resistance against electro-magnetic

interferences. Some components in the I/O system have a carrier rail contact that

dissipates electro-magnetic interferences to the carrier rail.

Figure 30: Carrier Rail Contact (Example)

Ensure sufficient grounding is provided!

You must take care to ensure the direct electrical connection between the carrier

rail contact and the carrier rail.

The carrier rail must be grounded.

For information on carrier rail properties, see section “Mounting” > … > “Carrier

Rail Properties”.

The bottom CAGE

CLAMP

connectors of the supply modules enable optional

connection of a field-side functional ground. This potential is made available to

the I/O module arranged on the right through the spring-loaded contact of the

three power contacts. Some I/O modules are equipped with a knife-edge contact

that taps this potential. This forms a potential group with regard to functional

ground with the I/O module arranged on the left.

Summary of Contents for 750-8212/040-010



















































































































































































































































































































































































































































Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands

WAGO 750-8212/040-010, Manual

Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands