9
EDITION 08/2022
ORDER NUMBER DOC2368104
Peristaltic pump
2
USING IN ACCORDANCE WITH THE INSTRUCTIONS
2.1
DEVICE TYPE
Peristaltic pump system for feeding powder lacquers.
2.2
TYPE OF USE
The peristaltic pumps serve to feed the powder, recovered from the spray booth, to the
powder tank (e.g., powder feed center) in a way that creates very little dust.
WARNING
Dust formation!
Danger of poisoning.
Danger due to escaping dust, contamination of the device and device components.
Only operate the device in conjunction with exhaust air equipment, for example a
suction device on the powder center.
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
Follow the instructions in the operating manual.
2.3
FOR USE IN POTENTIALLY EXPLOSIVE AREAS
The device is suitable for use in potentially explosive areas (zone 22) in accordance with
Directive 2014/34/EU.
2.4
PROCESSIBLE WORKING MATERIALS
In principle all powder lacquers can be fed with the peristaltic pump, for example epoxy,
polyester, mixed powders EP/PES/PUR.
2.5
MISUSE
Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
liquid coating products, e.g., solvents or water-based lacquers are not processed;
no food, medicine or cosmetics are processed.