41
EDITION 08/2022
ORDER NUMBER DOC2368104
Peristaltic pump
8.2.5 PROCESSING THE HOSE ENDS ON THE SPIRAL HOSE
NOTE:
Conductivity between the two hose fittings must be checked technically, by measuring,
during assembly and then periodically (every 3 months)!
∅
1
P_03276
1. Release spiral wire from the sheath, from the
outside by one revolution (maximum cutting
depth up to the wire).
2. On the opposite side of the wire outlet (180°),
drill a hole with a 1 mm
∅
through the hose
wall, approx. 10-25 mm distance to the hose
end.
P_04678
3. Pull the exposed spiral wire, from the outside
inwards, through the drilled hole.
P_04679
4. Press the remaining wire end towards the
opposite hose end.