W6 N 8000 Exklusive Instruction Manual Download

Page: 55 / 176

Using the upper thread to pull up the lower thread

Inserting the bobbin

Close the hook race with the plastic bobbin cover.

The bobbin cover is in the correct position
if it clicks into place when inserted.

W6 tip

On the W6 WERTARBEIT website you will find assistance under Service /
Help / W6 N 8000 Exklusive / Videos: Optimal Threading (approx. 4 minutes
long).

8.5

Using the upper thread to pull up the lower thread

Set the presser foot lever to the upper position.
Then press the Needle Up / Needle Down button once.

Hold the upper thread taut in your left hand.

Press the Needle Up / Needle Down button once.

The lower thread is pulled up.

Pull the lower thread, which creates a loop, upwards by pulling the upper
thread up at a slight angle.

Summary of Contents for N 8000 Exklusive

















































































































































































Search results

Summary of Contents for N 8000 Exklusive

Reviews:

Related manuals for N 8000 Exklusive

Brands by name

Popular brands

W6 N 8000 Exklusive, Instruction Manual

Search results

Summary of Contents for N 8000 Exklusive

Reviews:

Related manuals for N 8000 Exklusive

Brands by name

Popular brands