W6 N 8000 Exklusive Instruction Manual Download

Page: 53 / 176

Winding the bobbin

Inserting the bobbin

Start the machine by pressing the Start / Stop button or by pressing the foot
pedal.

The winding process stops automatically when the bobbin is full. (Release
the pedal.)

10.

Slide the bobbin and spindle to the left. Take the bobbin off the spindle. Hook
the thread into the thread cutter (g) from the rear on the left and pull forwards
to the right.

Please note:

Make sure that the bobbin threads never get into the winder

spindle. This can lead to damage.

8.4

Inserting a plastic bobbin in the hook race

Hold the plastic bobbin between your thumb and index finger in your left
hand.

The lower thread must hang down the left side.

This results in the bobbin and thread forming a “C” shape.

Summary of Contents for N 8000 Exklusive

















































































































































































Search results

Summary of Contents for N 8000 Exklusive

Reviews:

Related manuals for N 8000 Exklusive

Brands by name

Popular brands

W6 N 8000 Exklusive, Instruction Manual

Search results

Summary of Contents for N 8000 Exklusive

Reviews:

Related manuals for N 8000 Exklusive

Brands by name

Popular brands