W6 N 8000 Exklusive Instruction Manual Download

Page: 135 / 176

Sewing decorative stitches and letters

Using a pattern

Thread tension

When you press the Thread Tension button, the screen changes to the Thread
Tension screen. You can also adjust the thread tension for all the combined
patterns.

By pressing the A, B button, you can

change the Settings screen.

Thread tension:

1. Increase upper thread tension
2. Reduce lower thread tension

The preset tension is displayed in green. The screen displays the appropriate

presser foot , the needle position and the width / length at the top. You can return
to the selection mode by pressing the Return button.

PLEASE NOTE

The W6 factory tension setting is ideal. If the seam appearance is not ideal, the
W6 machine is usually threaded incorrectly in 95% of all cases!

135

Summary of Contents for N 8000 Exklusive

















































































































































































Search results

Summary of Contents for N 8000 Exklusive

Reviews:

Related manuals for N 8000 Exklusive

Brands by name

Popular brands

W6 N 8000 Exklusive, Instruction Manual

Search results

Summary of Contents for N 8000 Exklusive

Reviews:

Related manuals for N 8000 Exklusive

Brands by name

Popular brands