W6 N 8000 Exklusive Instruction Manual Download

Page: 50 / 176

Why use W6 bobbins?

Inserting the bobbin

This section contains information on winding the lower thread:

•

Why use W6 bobbins? (Section 8.1)

•

Removing the bobbin (Section 8.2)

•

Winding the bobbin (Section 8.3)

•

Inserting a plastic bobbin in the hook race (Section 8.4)

•

Using the upper thread to pull up the lower thread (Section 8.5)

8.1

Why use W6 bobbins?

Only W6 plastic bobbins fit perfectly in your W6 sewing machine. Bobbins made
by other manufacturers and metal bobbins do not fit and lead to a seam with an
unsatisfactory appearance or damage to the machine.

8.2

Removing the bobbin

Raise the presser foot lifter.

Slide the bobbin cover release button to the right and remove the bobbin
cover.

Take the bobbin out of the machine.

NOTE:

Use suitable W6 plastic bobbins for this model. Bobbins from other
manufacturers do not fit and cause damage to the hook system.

Summary of Contents for N 8000 Exklusive

















































































































































































Search results

Summary of Contents for N 8000 Exklusive

Reviews:

Related manuals for N 8000 Exklusive

Brands by name

Popular brands

W6 N 8000 Exklusive, Instruction Manual

Search results

Summary of Contents for N 8000 Exklusive

Reviews:

Related manuals for N 8000 Exklusive

Brands by name

Popular brands