Needle Up / Down / Slow Sewing button
Operating elements
5.3
Needle Up / Down / Slow Sewing button (C)
When NOT sewing
, the needle stop position changes to up or down when this
button is pressed.
When sewing,
the machine sews slowly when this button is pressed. If this
button is pressed again, the speed increases again.
5.4
Thread Cutter button (D)
Press this button after sewing to cut the upper and lower thread. The machine
cuts both threads automatically.
5.5
Speed control (E)
The machine sews faster when the slider is moved to the right (
) and slower
when it is moved to the left ( ).
NOTE:
If the foot controller is connected, the speed control is regulated by the pressure
applied to the foot controller.
31
Please note:
•
Only use thread tension-friendly and lint-free W6 thread.
•
Always press the Needle Up / Needle Down button before threading.
◦
Reason: The thread take-up lever and threader move into the correct
threading position.
•
Failure to do this will result in a faulty seam pattern and damage to the threader
(no warranty).
PLEASE NOTE:
•
Only use thread tension-friendly and lint-free W6 thread.
•
Poor quality threads may damage the cutter.
•
Do not press this button if there is no fabric in the machine or if the threads
are not to be cut. The threads could become entangled and cause damage.
•
Never press the button several times in a row. Before cutting, the needle
must be (down) in the fabric. Damages are not covered by the warranty.
•
Do not use this button when using thread weights higher than 30, nylon
thread or other special threads. In this case, use the manual thread cutter
(d).
Summary of Contents for N 8000 Exklusive
